Interactive Table

This topic contains 5 replies, has 5 voices, and was last updated by  Anonymous 1 year, 8 months ago.

  • Author
    Posts
  • #2748

    Anonymous

    The table was donated to a school where I work as their technician.  The table is a T-Surface; Serial number: **Removed by Promethean**.  The power button goes through the normal sequence of colors and remains white.  Nothing shows up on the table.  I’ve connected an external monitor via DVI-d port on the table and the monitor displays, “no dvi signal”.  Any suggestions?  Thanks!

  • #11438

    Anonymous

    Hi rspaulding,

    Thanks for posting on the Support Community and letting us know what you have tried.

    I’ll send you an email directly with further information.

    Kind regards,
    Adam
    Promethean Technical Support

  • #11439

    Anonymous

    The same is happening with our ActivTable. Can you let me know what the issue is please.

  • #11440

    Anonymous

    Hi AndreaGarrett,

    Thanks for posting.

    Have you tried to display the ActivTable to an external monitor using a DVI cable?
    If so, does this show any image from the ActivTable being displayed?

    Do you see anything display on the ActivTable screen?

    Kind regards,
    Adam
    Promethean Technical Support

  • #11441

    Anonymous

    Was there ever a fix for this?  Ours has started doing that today.

  • #11442

    Anonymous

    Hi brian_mckee,

    Thanks for posting. 

    Do you have the Model Number for your table?

    Do you get a No Signal screen or is it just black?

    Have you tried to display the ActivTable to an external monitor using a DVI cable?
    If so, does this show any image from the ActivTable being displayed?

    Do you see anything display on the ActivTable screen?

    Kind Regards,
    Maggie 
    Promethean Technical Support

You must be logged in to reply to this topic.