Interactive Flat Panels
  • This topic has 1 reply, 2 voices, and was last updated 5 years ago by Anonymous.
Viewing 1 reply thread
  • Author
    Posts
    • #1059
      Jim FuernissJim Fuerniss
      Participant

      The color on my PB has gone from displaying correctly to displaying in blues and grays. The color on my computer screen is normal; but the PB display is off. I’ve checked the connection cables and everything seems fine. It happened in the blink of an eye in the middle of class. The board is still on and works correctly; the color is just off.

    • #5902
      Anonymous
      Inactive

      Hi,

      Thank you for your post.

      Does this issue happen if you disconnect the VGA/HDMI cable from the projector?

      Does it happen after a factory reset?

      If possible, test with another lamp of the same model and check if the issue still persists.

      Thank you
      Miguel
      Promethean Technical Support

Viewing 1 reply thread
  • You must be logged in to reply to this topic.