What is ActivInspire?
Viewing 1 reply thread
  • Author
    Posts
    • #200
      Traci DollTraci Doll
      Participant

      The flame is red. I have tried turning the power off and unplugging it. I have unplugged the USB cables. I downloaded the most recent version of ActivInspire yesterday.

    • #3749
      Anonymous
      Inactive

      Hi Traci, 

      If you installed ActivInspire with the board still plugged in, it may have overwritten the board driver and not have been able to update it properly because the connection was in use. 

      Try doing a new installation of just the ActivDriver : 

      1. Download just the driver from our Knowledge Base here
      2. Unplug the USB to the Board
      3. Remove the existing driver through your control panel or Mac equivalent. 
      4. Install the downloaded driver and restart the computer after
      6. Connect the Board back up with the USB cable. 

      If for any reason this doesn’t fix the issue, please give our Tech Support a call and have the serial number of your board to hand. 

      Your reference is: 00467828

Viewing 1 reply thread
  • You must be logged in to reply to this topic.