What is ActivInspire?
  • This topic has 1 reply, 2 voices, and was last updated 6 years ago by Anonymous.
Viewing 1 reply thread
  • Author
    Posts
    • #125
      AprilApril
      Participant

      The green light comes on, but then starts to flash red and will not power the projector on. Bulb has been replaced

    • #3520
      Anonymous
      Inactive

      Hi April, 
      Thank you for your post. 
      When you say the bulb was replaced, do you mean it was literally just replaced and the projector has not worked since?  
      If so, make sure the lamp hatch is securely in place as the projector will not strike without out. 
      If it has worked since, but has now started flashing, then please record the number of flashes you see before there is a little pause and it flashes again with the same number before the next pause.
      Next make a note of the projector serial number on the back of the unit and call your Technical Support team to report the issue. 

      Your case reference number is: 00460351.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.