Projectors
Viewing 1 reply thread
  • Author
    Posts
    • #764
      Missy PresleyMissy Presley
      Participant

      When the board is turned on, the green light comes on and you can hear a motor running, then the motor slows down, then it speeds up, then it shuts off and goes to blinking red.

    • #5174
      Anonymous
      Inactive

      The behavior described resembles what we see when either a
      lamp in a projector is no longer able to be lit or a projector is no longer
      able to light lamps.

       

      To determine which of those the case is, we would advise a
      working lamp from another projector of the same model be borrowed for
      installation in the projector in question. 
      If that working lamp is able to light up, then the original lamp was
      causing this behavior; if not then the projector is the cause.

       

      In either case, we would recommend contacting our Technical Support
      Team, either by
      phone
      or by submitting a ‘Contact
      Us’ form
      on our Knowledgebase with the serial number of the projector in question.  This will help our team verify what warranty may
      be in place for the lamp or the projector.

       

      (Support Case 00566320)

Viewing 1 reply thread
  • You must be logged in to reply to this topic.